• The common problem in quartz stone splicing is that the two plates appear high or low, and the treatment method often chooses to grind, which will lead to the loss of gloss on the surface of the plate, and how to repair the loss of gloss?
    38 2019/9/23
  • Why do we all say that quartzite is good, first of all, because its texture is very hard, quartzite is die-cast under vacuum conditions, the surface of the plate is the same, compact and porous, its density can reach 2.3g/m, which fully illustrates the hardness of quartzite, and is not easy to crack
    83 2019/9/18
  • Avoid local overheating and cracking of the table. Do not place hot pots, hot buckets, electric stoves and other high-temperature utensils directly on the table for a long time. It is recommended to use a good heat insulation mat.
    69 2019/9/16
  • Quartz stone is made of 90% quartz crystals and 7% resin and other binders by artificial die casting. It belongs to artificial stone slab and is also called synthetic stone. Because quartz sands containing more than 90% of quartz slabs (less than 90% is unqualified, strong resin sense and will reduce hardness) are called quartz by quartz stone manufacturers and stand alone in artificial stone products.
    60 2019/9/11
  • With the rapid development of quartz in China for more than ten years, the standard, technology and level of quartz industry have been gradually improved, and the variety of products has been increasing. However, the fierce competition in the industry and the bottleneck of the development of the industry have also been followed. At present, there are quite a number of small workshops
    68 2019/9/4
  • Quartz stone is synthesized from quartz crystal and resin. It is manufactured through more than 30 processes, such as vacuum die casting, heating solidification, high-speed
    85 2019/9/2
  • Speaking of this, Xiaobian really admires the imagination and creativity of our people. Does it mean that you don't have to take care of it after putting a film on it? Is it necessary to put a film on the quartz table?
    89 2019/8/26
  • More than 90% quartz sand and 7% resin and other adhesives are solidified by vacuum, high pressure and kiln. Therefore, the higher the resin content, the worse the hardness of quartzite, the easier the quartzite deformation, the less scratch-resistant (the price of
    92 2019/8/23
  • With the improvement of production technology and capability of quartz stone manufacturers in China, quartz stone has been widely used in overall home decoration. Because the water absorption of quartz
    103 2019/8/21
  • Quartz stone adopts a new production technology and technology. Quartz stone can make the density of sheet metal reach 2.3-2.6g/cm3 by vacuum (vacuum pumping up to - 0.098Mpa) and high pressure and high vibration, and the water absorption is as low as 0.02%. So it is difficult for liquid to penetrate into the inside of sheet metal.
    99 2019/8/16
Home page Previous page   1   彩83彩票主页 2    3    4    5   ... 19   next page  End Page     To Page
左右棋牌 智慧彩票投注 全民彩开户 彩63彩票技巧 亚洲彩票 湖南快乐十分 诚信网投开户 内蒙古快3 诚信网投开奖直播网 快赢彩票计划